Introduction To Three Methods For Using Lithium Batteries

Regarding lithium batteries, many people will say that this is too familiar! But do you know how to use lithium batteries correctly and introduce three methods? I do n’t know if we follow the Lithium Iron Phosphate Battery Rack Manufacturer to learn together!

The correct use of lithium batteries, the introduction of three methods-avoid excessive charging.

When the battery is short-circuited, its short-circuit current can reach hundreds of amperes. The light ones will cause fever, and even the batteries may explode. Therefore, special care should be taken when installing or using the battery, and check that there is no short circuit before putting it into use. At the same time, as mentioned earlier, improper charging will damage the battery, but excessive charging or discharging will also seriously damage the battery, which is extremely detrimental to the battery's electrical performance and cycle life. Overcharging will increase the water loss of the battery, accelerate the corrosion of the grid, soften the active material, and increase the probability of battery deformation. Do not place the battery in an overheated environment. And the battery can only be charged when the battery temperature returns to normal. Stop charging when overheating is found.

 Lithium Battery

The correct use of lithium batteries, the introduction of three major methods-correct maintenance.

Proper maintenance of electric Li-Ion Battery Pack for EV can make the battery life of electric vehicles longer and save more investment. It should be noted that the battery must be installed firmly to prevent the battery from being damaged by vibration during riding. Otherwise, when the car is driving on bumpy roads, the battery will shake or even fall off and be damaged. Secondly, it is necessary to always check whether the battery connection cable and the live connector are firm and whether the connection between the cable and the connector is good. Otherwise, it may cause electric sparks and severely cause a battery explosion.

The correct use method of the Li-Ion Battery Pack for EV of the electric rickshaw, three methods are introduced-pay attention to the charging environment.

In the high-temperature season, the battery has the problem of overcharging. The temperature of the battery should be reduced as much as possible to ensure good heat dissipation and prevent it from being charged after the hot sun. Exposure in the sun will increase the temperature of the battery and increase the activity of various active substances in the battery, affecting the service life of the battery. On the contrary, under low-temperature conditions, the battery has problems with poor charge acceptance and insufficient charge. In this case, it is necessary to increase the charging voltage and extend the charging time, and take heat preservation and anti-freezing measures, so as to help ensure sufficient charge. Extend the service life of the battery.

The correct use of lithium batteries, the introduction of the three major methods, do you know now? Do you know about these three methods? If you don't know, you can collect these methods. I suggest that you have a better lithium battery, and do n’t expose it!